News

Construction Of Marble

When laying marble decorative panels, the base ash and debris should be thoroughly removed, rinsed with water, and dried in the sun. The bonding layer must use dry hard mortar, which should be mixed evenly and avoid using thin mortar. Wet the base layer with mortar, brush the cement paste evenly, and then lay the bonding layer mortar. The bonding layer mortar should be compacted and kneaded flat. Before panel laying, the panels should be soaked and dried, and after trial laying, they should be formally laid. After positioning, lightly tap and compact the plate evenly.

 

You Might Also Like

Send Inquiry

在线客服