How To Stick PVC Panels On Walls

When installing PVC panels, it is important to make preparations before installation and follow the correct installation steps:
1. Before installation, use a measuring tape to measure the dimensions of the construction wall and calculate the approximate specifications and quantity of PVC sheets to be used.
2. When starting the installation, first install the top edge line, apply PVC board specific adhesive on both ends, and bond the top edge; Then separate for a few minutes and stick firmly. If the space is relatively humid, two skirting boards can be connected together, and suitable expansion joints need to be left, especially at corners, where more expansion joints need to be considered.
3. Next, install the top 1.5cm extension screw or steel nail, apply glue to the groove at the waist, wait for a few minutes, and then insert it into the concave convex surface. Note that it should form a 45 degree diagonal with the wall corner.
4. Install rubber anti-collision strips on the checkpoint to ensure that the sealing strips on both sides are inserted around the PVC panel. Cut the size of the PVC panel and cover it with aluminum alloy. The basic installation is completed.
5. When fully installed, apply special adhesive at the corners and stick it to the top corner. Wait for a while for it to stick tighter, which is beneficial for extending the service life.